SOLACE MARITIME
What Is Bollard Pull?

What Is Bollard Pull?

Published: Updated: Technical review required: Operation-specific calculations

Bollard pull is the steady pulling force a tug can produce while secured to a fixed point, normally stated in metric tonnes-force (t) or kilonewtons (kN). It is a key capability indicator, but safe tug selection must also consider sea state, towing speed, endurance, equipment and regulatory limits.

ItemDefinitionPlanning relevance
Bollard pullStatic pulling forcet or kN
Engine powerInstalled mechanical outputkW or bhp
Towline pullForce during an actual towVaries with speed and conditions

What does a bollard pull figure tell you?

A bollard pull figure describes force under a static test condition. Check whether it is a maximum or sustained result and which propulsion direction was tested. It does not describe every force available during a moving tow.

Is bollard pull the same as engine power?

No. Engine power measures mechanical output in kW or bhp; bollard pull measures force, usually in tonnes-force or kN. Propeller design, nozzles, machinery condition and the test setup affect how effectively power produces thrust, so there is no universal conversion.

How is required pulling force assessed?

Required pull is assessed from the tow characteristics, planned speed, route and environmental resistance. Wind, waves and current can change the demand. A tow-specific engineering assessment compares that demand with the tug capability and operating limits.

References